Commercial

PureIt water purification, desalination, and sterilization systems have withstood the test of time and proven their mettle in multiple industrial and commercial applications. We attribute this success to our commitment to learn and continuously improve our quality standards. With our expertise in design and manufacturing, these systems are operating trouble free in even the most demanding and extreme conditions.

Our products are made in USA

Commercial

PureIt water purification, desalination, and sterilization systems have withstood the test of time and proven their mettle in multiple industrial and commercial applications. We attribute this success to our commitment to learn and continuously improve our quality standards. With our expertise in design and manufacturing, these systems are operating trouble free in even the most demanding and extreme conditions.

Our products are made in USA

100 GPD

Highlights

* Brand : PureIt
* Origin : USA
* Capacity : 100 GPD (15 LPH)
* Membrane : USA
* Filtration Stage : Five Reserve
* Capacity : 11 Gallons Pressure Tank.
* Technology : Reverse Osmosis

Cartridges Filters include:

1. 10″ length 5 micron Spun-polypropylene Sediment Filter.
2. 10″ length Granular Activated Carbon Filter
3. 10″ length Block Carbon Filter
4. 100 x 1 GPD Filmtec membrane
5. 8″ Inline Post CarbonFilter

200 GPD

Highlights

* Brand : PureIt
* Origin : USA
* Capacity : 200 GPD (30LPH)
* Membrane : USA
* Filtration Stage : Five Reserve
* Capacity : 11 Gallons Pressure Tank.
* Technology : Reverse Osmosis
* Dimension : 780 X 420 X 210 mm

Cartridges Filters include:

1. 20″ length 5 micron Spun-polypropylene Sediment Filter.
2. 20″ length Granular Activated Carbon Filter
3. 20″ length Block Carbon Filter
4. 100 x 4 GPD Filmtec membrane
5. 12″ Inline Post CarbonFilter

400 GPD

Highlights

* Brand : PureIt
* Origin : USA
* Capacity : 400 GPD (60LPH)
* Membrane : USA
* Filtration Stage : Five Reserve
* Capacity : 11 Gallons Pressure Tank.
* Technology : Reverse Osmosis
* Dimension : 780 X 420 X 210 mm

Cartridges Filters include:

1. 20″ length 5 micron Spun-polypropylene Sediment Filter.
2. 20″ length Granular Activated Carbon Filter
3. 20″ length Block Carbon Filter
4. 100 x 4 GPD Filmtec membrane
5. 12″ Inline Post CarbonFilter

1500 - 3000 GPD

  • Stainless steel frame stand. Designed for municipal/tap water source.
  • 200psi of operation pressure.
  • Reliable quality components utilized for system construction.
  • Optimum water recovery.
  • Electro-mechanical relay logic control circuit.
  • Dual-level tank switches and controls.
  • Plumbed for optimum water recovery.

3000 - 6000 GPD

FEED WATER PARAMETERS:

  • Max. Temperature 85 F.
  • Max. pressure between 40-80 psi.
  • Max. TDS 2,000 ppm.
  • Max. iron tolerance 0.5 ppm.
  • Hydrogen sulfide must be removed.
  • Silica tolerance can not be higher than 125 ppm in the concentrate stream. Antiscalant should be considered for any levels over 75 ppm.
  • Turbidity should be removed.
  • Harness must be removed.

3000 - 6000 GPD

OPERATING PARAMETERS:

  • Max. Operating pressure 200 psi.
  • Water recovery up to 60% but not recommended to adjust higher than 50%.
  • pH range 3-11.
  • Flow rates are determined by the membrane mfg's testing criteria of 1500 ppm NaCI solution, 77 F water temperature, 225 psi at 10-15% recovery. Actual flow rates may vary depending on the pretreatment, water conditions, system volumn, membrane array and operation pressure.

Contact Us

  • Al-Dayaar Building 429 Al-Damascas Street Al-Qusais, Dubai
  • info@pureituae.com
  • +971 556633946